|
|
Build Your Online Product Catalogs?
| Product Name: |
new developed HY- E635# Addition Molding Silicone
|
| Supply Ability: |
1000 |
| Related proudcts |
addition molding sil, high temperature sil, |
| Specifications |
addtion cure silicone for prototyping, making concrete stones, p |
| Price Term: |
FOB |
| Port of loading: |
shenzhen |
| Minimum Order |
100 Kilogram/Kilograms |
| Unit Price: |
US $ 10 - 15 / Kilogram |
|
HY- E635# Addition Molding Silicone
HY- E635# Addition Molding Silicone
1.Description of HY- E635# Addition Molding Silicone
HY-E635# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds and prototyping application.
OPERRATING INSTRUCTION of HY-E635# Addition molding silicone:
1.Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(***ergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
Attention: Do not use the same container to hold addition cured silicone rubber and condensation one, and it is also forbidded to use the same rod to stir the condensation and addition cured silicone rubber)
Any further information required ,pls feel free to contact Miss Vicky and call the mobile of 0086-18938867593 or the phone 0086-755-89212369. Welcome to visit www(dot)szrl(dot)net anytime . |
| Company: |
Hong Ye afgs Technology Co., Ltd.
|
| Contact: |
Ms. vicky gong |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China |
| Postcode: |
518117 |
| Tel: |
86-755-89212369 |
| Fax: |
86-0755-89948030 |
| E-mail: |
|
|
|
|
Home
